Filters

Oil circulation

15 products

Showing 1 - 15 of 15 products
Camshaft rear bearing/oil pump housing with rotors 10.5mm up to 1980
Camshaft rear bearing/oil pump housing with rotors 11.2mm 1980 onward.Camshaft rear bearing/oil pump housing with rotors 11.2mm 1980 onward.
Camshaft rear bearing/oil pump housing with rotors 11.2mm 1980 onward. Part Number: 95559620EB
£117.60 (£98.00 ex. VAT)
Copper sealing washer 7.1mmx10mmx1.0mm, used for cylinder head oil feed etc, pack of 10 washers.
Double copper seal washer on crankcase to cyl head oil feed
Double copper seal washer on crankcase to cyl head oil feed Part Number: 00800
£1.68 (£1.40 ex. VAT)
Oil feed pipe assembly, copper nickel, from crankcase to cylinder heads 2cv6.
Oil feed pipe assembly, Visa 652cc ONLY (not for 2cv), copper nickel, from crankcase to cyl heads.
Oil low pressure sender switch 602cc, bullet connector 1968 to 1972
Oil low pressure sender switch 602cc, bullet connector 1968 to 1972 Part Number: 12280
£7.82 (£6.52 ex. VAT)
Oil low pressure sender switch 602cc, Lucar connector 1970> MOST COMMON TYPE.
Oil low pressure sender switch 602cc, screw connector 1972 to 1977??
Oil pump rotors 2cv6 10.5mm, only until 1980, pair.
Oil pump rotors 2cv6 10.5mm, only until 1980, pair. Part Number: D0225
£43.20 (£36.00 ex. VAT)
Oil pump rotors 2cv6 11.2mm, 1980 onward, pair.
Oil pump rotors 2cv6 11.2mm, 1980 onward, pair. Part Number: ROTORKIT11
£58.80 (£49.00 ex. VAT)
Oil temperature sensor sender, M16x1.50 to fit in place of sump screw. 6volts to 12volts.
Union, banjo bolt, M7 x 1.00, for standard oil feed pipe, screw oil feed pipe to cyl head 1mm supply

Recently viewed