Filters

Chassis fitting parts

34 products

Showing 1 - 34 of 34 products
Axle tube bolt, front, M10x120, 10.9 high tensile. See important notes.
Axle tube bolt, rear, 10.9 high tensile. See important notes.
Axle tube bolt, rear, 10.9 high tensile. See important notes. Part Number: 42496
£1.98 (£1.65 ex. VAT)
Bump stop, NEW SUPER BONDED QUALITY, rectangular base, beneath front arm on side of chassis. SEE NOTESBump stop, NEW SUPER BONDED QUALITY, rectangular base, beneath front arm on side of chassis. SEE NOTES
Bump stop, round, rear, fits on top of chassis to rear of rear axle, Acadiane or AK400Bump stop, round, rear, fits on top of chassis to rear of rear axle, Acadiane or AK400
Bump stop, round, top of chassis, front.Bump stop, round, top of chassis, front.
Bump stop, round, top of chassis, front. Part Number: AZ4371BALT
£7.73 (£6.44 ex. VAT)
Chassis foam strip self adhesive, roll 6mtr x 6mm x 25mm.
Chassis foam strip self adhesive, roll 6mtr x 6mm x 25mm. Part Number: 0005-02-6M
£11.52 (£9.60 ex. VAT)
Citroen chassis, VIN plate, 78mmx44mm, blank for you to stamp.
Citroen chassis, VIN plate, 78mmx44mm, blank for you to stamp. Part Number: 3800700
£9.60 (£8.00 ex. VAT)
Clip, each end of suspension knife edge pivot.
Clip, each end of suspension knife edge pivot. Part Number: 99649
£1.08 (£0.90 ex. VAT)
Clip, plastic, to hold fuel and/or brake pipe to original and Ecas chassis.Clip, plastic, to hold fuel and/or brake pipe to original and Ecas chassis.
Gaiter, around tie rod to suspension tube, 2cv6 etc. DOES NOT FIT AK400 OR AMI 8.
Gaiter, around tie rod to suspension tube, for AK400, AK350, AMI 8 onlyGaiter, around tie rod to suspension tube, for AK400, AK350, AMI 8 only
J - clip nut, lug nut, u-nut, chimney nut, spire nut, threaded M7 x 1.00. Per 1 piece.J - clip nut, lug nut, u-nut, chimney nut, spire nut, threaded M7 x 1.00. Per 1 piece.
Lock nut, 46mm (M36x1.50) for threaded tube on suspension tube.Lock nut, 46mm (M36x1.50) for threaded tube on suspension tube.
Lock nut, 46mm (M36x1.50) for threaded tube on suspension tube. Part Number: 43487
£5.88 (£4.90 ex. VAT)
Lock washer, double, for axle tube bolts, front or rear.
Lock washer, double, for axle tube bolts, front or rear. Part Number: 41489
£2.76 (£2.30 ex. VAT)
Mounting pin (stud) for shock absorber 2cv
Mounting pin (stud) for shock absorber 2cv Part Number: 6252A
£11.94 (£9.95 ex. VAT)
Mounting plate, 2 x M9 threaded holes, allows fuel tank saddle to fit to chassis.
Nut for square bump stop and steering rack pins.
Nut for square bump stop and steering rack pins. Part Number: 32024
£0.38 (£0.32 ex. VAT)
Nut, M12x1.25 for shock absorber mount, 2cv, not Ami or AK etc.
Nut, M12x1.25 for shock absorber mount, 2cv, not Ami or AK etc. Part Number: 93971
£0.90 (£0.75 ex. VAT)
Rectangular base shim 4mm thick 30mmx42mm, fits beneath front arm bump stop on side of chassis.
Set screw (fully threaded bolt) M9 x 1.25 30mm length for mounting plate of fuel tank saddle.
Set screw holding front shock absorber mount plate to arm, M9x1.25 16mm. Per 1 piece.
Set screw, plated, 11mm hex head, M7 x 1.00, 25mm long, Per 25
Set screw, plated, 11mm hex head, M7 x 1.00, 25mm long, Per 25 Part Number: SS725
£7.25 (£6.04 ex. VAT)
Set screw, plated, 11mm hex head, M7 x 1.00, 30mm long, Sold per single screw.
Set screw, STAINLESS A2, 11mm hex head, M7 x 1.00, 35mm long, Sold per SINGLE screw.Set screw, STAINLESS A2, 11mm hex head, M7 x 1.00, 35mm long, Sold per SINGLE screw.
Spacer, 10mm thick, between rear axle and chassis, 2CV6, Dyane 6. Etc...Spacer, 10mm thick, between rear axle and chassis, 2CV6, Dyane 6. Etc...
Spacer, 10mm thick, between rear axle and chassis, 2CV6, Dyane 6. Etc... Part Number: AU42497
£17.88 (£14.90 ex. VAT)
Spacer, wedge shaped for between Acadiane rear axle and top of chassis memberSpacer, wedge shaped for between Acadiane rear axle and top of chassis member
Steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).Steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).
Sump guard tray plate, aluminium.
Sump guard tray plate, aluminium. Part Number: 63ALU
£103.81 (£86.51 ex. VAT)
Suspension cylinder steel backed rubber bump stop (doughnut).Suspension cylinder steel backed rubber bump stop (doughnut).
Suspension cylinder steel backed rubber bump stop (doughnut). Part Number: A4351B
£13.96 (£11.63 ex. VAT)
Suspension knife edge pivot pin, front, (also rear up to 1969 on some cars) 41mm x 12mm.
Suspension tie rod end eye. 1970 onward, for all Dolly, Charleston etc. 110mm.
Washer, M9, for Set screw holding front shock absorber mount plate to arm, Per 1 piece.

Recently viewed